We provide a top quality customer service.
enquire now
No project is too far away; we will travel to all corners of the Earth.
enquire now
Features
- · Mains LED shows when the battery is on charge
- · Low Battery LED shows when the battery needs re-charging
- · Tool storage is built into the case
- · Very low battery inhibits operation
- · Supplied with tools and mains charging lead
- · Manual or Auto (Hands-Free) Operation
Operations
To weld a wire to a steel body, the magnet is used to make a return contact.
The thermocouple wire is stripped back and the pliers are used to grip this wire about 25mm from the cut end.
The ‘charge’ button is pushed and released. After a short time the LEDS change from ‘charging’ to ‘ready’.
The thermocouple wire is held firmly against the steel surface and the ‘weld’ button is pushed. This welds the wire to the steel body(Auto Mode: Weld is made automatically 1.5 seconds after contact).
The energy setting knob is used to set the required energy for different wire diameters.
Technical Details
Discharge energy 18 to 40 Joules Output
Battery re-charge time 6 - 8 hours